Astro Mixamp Motherboard Replacement

Geschreven door: Hope Burns
  • Reacties: 1
Astro Mixamp Motherboard Replacement

Moeilijkheid

Difficult

Stappen

7

Tijd vereist

10 minuten

Inleiding

Use this guide when the device motherboard needs to be removed. (Soldering Required)

  1. hhJPyTh3wpuvswvB
    hhJPyTh3wpuvswvB
    rqHyZhrKgIba41yp

    • Grip the dial tightly and pull straight off the device.

    • Repeat for the second dial

  2. RkOZPNpqJvyPxFTW
    RkOZPNpqJvyPxFTW
    HHUAQDVJDKU6YP2G

    • Using tweezers, remove the spacer nuts and washers from each dial post.

  3. Ba1AyCDwVheHgbIB
    Ba1AyCDwVheHgbIB
    LjhIEtPXRUpHSCQZ

    • Before opening your device, ensure the device is not on or connected to the charging cable.

    • Insert a plastic opening tool into the seam between the rubber foot and plastic casing.

    • Pull the rubber foot free of the plastic casing.

  4. eW2HtSN2Og2R2Q3k

    • Use a screwdriver to remove the screw from the rear casing.

  5. dek1mxJoCQSHAZ2R

    • Gently lift the rear casing from the device.

    The Astro Mixamp Pro is largely the same process as this, except there are some plastic tabs on the rear casing holding it onto the front plate. Carefully work along the seams on the long sides and the corners with something flat and stiff, gently levering the rear housing out and away from the front plate to disengage the plastic tabs. With enough patience and care, they'll pop out of their spots and the casing will be free.

    foshwosh -

  6. DIepP6OM2LSEOrTf
    DIepP6OM2LSEOrTf
    cTAtkrlwdxN3knyc
    VZUpTpWhQLFYSLwE

    • Remove the four screws that hold the motherboard in place.

    • Only touch the edges of the motherboard. Touching the surface can damage the motherboard.

  7. NegPDhsRr4itGFNb

    • Gently pull the motherboard from the front cover.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

Hope Burns

Lid sinds: 29/10/16

741 Reputatie

0 commentaren