DBPOWER RD-810 Top Cover Replacement

Geschreven door: John Russell
  • Reacties: 1
DBPOWER RD-810 Top Cover Replacement

Moeilijkheid

Easy

Stappen

2

Tijd vereist

3 minuten

Inleiding

The top cover of the RD-810 protects the internal components. It must be removed to conduct any repairs.

  1. HUx35osIAcYYPDbY
    HUx35osIAcYYPDbY
    E2OCwCpEahbw1Xol

    • Make sure the projector is unplugged before starting

    • Place the projector upside down to access the screws on the bottom.

    • Remove the five 7mm long screws using a #3 Phillips screwdriver at least 2 inches long.

  2. gOgVteitjwGebQyi

    • Flip the projector over and then remove the cover by lifting it up.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

John Russell

Lid sinds: 14/02/18

941 Reputatie

Een commentaar

Projector motherboard 8 10

7447647735

Shyam Pawar -